Collection Schematic

The charger is based on a charging voltage of 2.4 V per cell, in accordance with most manufacturers recommendations. The schema pulses the battery under charge with 14.4 V (6 cells ? 2.4 V per cell) at a rate of 120 Hz. The design provides current limiting to protect the chargers internal components while limiting the charging rate to prevent damaging severely discharged lead-acid batteries. 

The maximum recommended charging current is normally about one-fourth the ampere-hour rating of the battery. For example, the maximum charging current for an average 44 ampere-hour battery is 11 A. If the impedance of the load requires a charging current greater than the 11 A current limit, the schema will go into current limiting. The amplitude of the charging pulses is controlled to maintain a maximum peak charging current of 11 A (8 A average).