Showing posts with label crossover. Show all posts
Showing posts with label crossover. Show all posts
Wednesday, November 19, 2014
Active Crossover 2 Way Schematics
Therefore this architecture represents the simplest access I could booty and still get the adapted outcome.The band akin audio arresting enters the absorber area it is astern out of phase.This is to atone for the filters which will alter the appearance afresh appropriately abiding the arresting to it’s able phase. The filters are more-or-less accepted low and aerial canyon filters appropriately however, added capacitors and resistors accept been added in adjustment to get the altruism bottomward to a minimum appliance alone E12 components.


This alive Cantankerous over is adequately beeline forward. It consists of a absorber and two 3rd order, 18 dB per octave filters. One low canyon and the added high. The cantankerous over abundance is set at 2Khz and is advised for AEK’s 400watt per access PA/Keyboard Amp systems. Obviously alone one access is apparent here.
This ambit may not be of awfully abundant use to anyone as it was accurately advised to clothing the applications. It is not capricious or switchable for two reasons. Firstly, it didn’t charge to be back the backdrop of the apostle arrangement were already known. And secondly, the added complication was put into the accurateness of the crossover rather than it’s flexibility. The filters are akin in account to anniversary added as able-bodied as can be accepted appliance alone E12 components. If switching were to be active to accord a ambit of abundance options, a accommodation would accept to be fabricated on clarify accuracy.
The alone added way to accomplish a accepted crossover architecture and advance accurateness would apparently be to use Switched capacitor clarify architecture blocks. In theory, two 18or 24dB per octave filters could be complete such that they tracked anniversary added by actuality bound to the aforementioned clock. This would be a nice agreement but I haven’t had the befalling to prove this technology for this affectionate of application. My primary affair was the breach through of switching babble appliance such a design.
Thursday, October 30, 2014
Circuit 150W amplifier with active crossover
Series 150W Amplifier With Active Crossover Series 150W Amplifier with Active Crossover is very interesting. Actually, this circuit uses 4-channel power amplifier chip. Well, as an Active Crossover here we use also a chip that can separate the tone of the bass, midrange and treble, the output from the Active Crossover can be directly amplified by power amplifier.
Power Chip 4-channel amplifier that we use is SANYO LA47536 who have power outputs up to 150W, while for Active Crossover (Active Crossover) we use the LF353 from National Semiconductor.
Monday, August 25, 2014
2 Way Active Crossover Circuit
This is the schematic diagram of 2-way active crossover schema. The "active" word means that the schema use active component and need power supply to work. Take a note that the input of this schema is not connected to the output of power amplifier. This crossover schema module must be placed before the amplifier schema. The "Low Out" output connected to a power amplifier and the low speaker [Woofer], while the "High Out" output is drive the power amplifier of high speaker [Tweeter].
Parts List
R1 = 100Kohms
R2,3,4,5,6 = 37.5ohms [33K+4.7K]
R7 = 75Kohms[150K//150K
R8 = N.C
R9,10,11,12,13,14,15,16 = 10Kohms
R17,18 = 47Kohms
R19,20 = 47ohms
C1 = 4.7uF/100V MKT
C2,3,4,5,6,7,12,13 = 1nF 100V MKT
C8,9,10,11,14,15 = 100nF 100V MKT
C16 = 2.2uF/100V MKT
C17 = 470nF 100V MKT
C18,19 = 47uF/25V
J1,2,3 = 2pin conn. 2.54mm pin step
J4 = 3pin conn. 2.54mm pin step
IC1,2,3 = NE5532 , TL072
TR1 = 100Kohms trim. or pot.
TR2,3 = 47Kohms trim. or pot.
All the Resistors is 1,2% 1/4W metal film
Circuit Source: 2-Way Active Crossover Circuit with Linear Phase Response
Subscribe to:
Posts (Atom)