Friday, September 26, 2014
Browse »
home»
circuit
»
Level
»
meter
»
Recording
»
Recording Level Meter Circuit
Recording Level Meter Circuit
The circuit shows a two—stage voltage amplifier driving a recording level meter. The AC signal input is amplified, rectified, and the resultant DC voltage shown on the meter.
The circuit can be used with a tape recorder or audio mixer and should be fed from a point early in the pre-amp. Current consumption in a no-signal state is 2.8mA. The 12K preset gives a variation in sensitivity. The meter can be any general purpose type.
The circuit can be used with a tape recorder or audio mixer and should be fed from a point early in the pre-amp. Current consumption in a no-signal state is 2.8mA. The 12K preset gives a variation in sensitivity. The meter can be any general purpose type.
Subscribe to:
Post Comments (Atom)
No comments:
Post a Comment